Frequently Asked Question

How do I configure Crestron Simpl to display door station video?
Last Updated 3 years ago

Display the Video

To display incoming video from the door station during an incoming call, a "Embedded Video" or "Advanced Embedded Video" embedded app should be used. In the property grid enter the following configuration:

  • Source ID should be set for "252 – H.264".
  • URL should be set for "DOOR_STATION".

When a call is made from the door station to the Crestron TSW(s), the SIP call sends all the video information directly within the call itself. So no camera URL needs to be defined and the TSW can dynamically show the correct video based on which door station is calling if there are multiple door stations in the system.

Please Wait!

Please wait... it will take a second!